Category Archives: #Daviedress
Second Davie Dress – The Return
Hi, I was so impressed with the fit of my first Davie Dress that I have made another one, this one is in a stretch fabric bought from eBay it is thickish, and will be great for our holiday. It does have quite a big pattern on it and I was torn between thinking it was too big for the small panels, or because it was so big it wouldn’t matter. It turns out I was right the pattern is so big that it is not noticable on the dress.
I have made it in the shorter size, a straight 2 but I have changed the neckline. The problem I have with the neckline is it is a bit high and with having to take off an extra 1/4 inch off the shoulders makes it even higher.
So what I did was I made up the dress with a slightly lower neckline, this was still not low enough, so I put the dress on my dress form then put a t-shirt with the neckline I was going for over the top of it, then I drew it on the dress.
After I cut off the excess I had then had to decide how to finish it off. Too be honest I didn’t look at the instructions on the pattern at this point, and I didn’t when I made the first one. The Craftsy class I took had you fold the neck strip in half, stitch it to the neck line and topstitch it in place, I didn’t like the mess it left inside so I decided to do it a different way.
I measured the new neckline and took an inch off it then added the seam allowance, made it into a loop, trimmed the seam allowance and pinned it to the neckline, right side of the neckband to the wrong side of the dress, stretching it out slightly, as I had done in the Craftsy class. Then I stitched the neck band to the dress, timmed off half the seam allowance and folded it over to the front of the dress, and then folded it under on its self so that the neck edge was encased in the neckband, I then topstitched this round, it gives it a nice neat edge and I am thinking of undoing the previous Davie dress and changing the neckline on that.
There might be another Davie Dress on the horizon but I haven’t decided yet, I’ve just found out about the Deer&Doe free t-shirt pattern that can be made into a dress or the Anna top with a gathered skirt, this Florida holiday will be the year of the T-shirt dress if I’m not careful.
Back soon
Sewaholic Davie dress
Hi, since my brief look at knit fabrics I have been looking to complete Sewaholics Davie Dress, when I ordered it I hadn’t realised that it was made in a stretch fabric, but I was willing to give it a go. I had some fabric bought from eBay that I wasn’t all that keen on once I had it delivered so it was ideal for my test run.
My first problem is that I’m not a pear shape which is the shape that Sewaholic favours, at 33 27 37 I was alright for waist and bust with a US 6 but my hips are a US 2, what I have done before in this position is just cut a straight US 6 but I have ended up with too much fabric at the hip and it has looked just plain wrong, so I decide to grade down from the waist to the hip size, I used my new hip curve and was very happy with the results.
I did a quick pin to my dress form and it looked alright
My second problem is that I’m short 5ft 2in and I do usually have a problem with princess seam but I’ll cover that a bit later.
Who wants to see the first attempt at the dress.
I would like to say it looks a lot better on the dress form than it did on me and also by this point I had already raised the shoulder seams about an inch. The dress was just too big all over, except on the hip, the other problem was that without raising the shoulder seam by an inch the bust part of the princess seam was way too low, and even with the inch taken out it still wasn’t sitting properly.
Because of the amount of excess I had at the waist and bust I decided to try a straight size 2, after all there are 8 seams so I could quite happily ‘steal’ back 2 inches from the seam allowance. Also by going for a size 2 you already lost 3/4 inch from the shoulder.
What I didn’t realise was how rollyupy the already cut pieces were going to be and ironing them didn’t help 😦 however what I did find was that if I laid it on the ironing board it stuck to the cover like fuzzy felt, I managed to keep it flat enough to cut the new pieces out.
The dress went together very nicely, I used a normal straight stitch as this was only a test dress, zigzag is so hard to unpick, also I don’t like the way it looks on the outside. I might just use my overlocker in future.
Here is the dress with the basic seams put in it fits loads better.
There is something squiffy going on with the back, but I’m not sure if it is how I standing, the shoulder seam could do with coming up slightly which will might fix this and will bring the bust point of the dress up to the correct position.
I made the longer length which comes just below my knees, I’m not sure if the shorter one might be just out of my comfort zone.
I’ll be back with the finished article soon, also I like the fabric made up a lot more than just laying in the drawer so this might by my first dress for Florida.
It is a medium weight stretch fabric with a nice amount of body, I used my walking foot which is brilliant and my sewing machine didn’t try to eat it once, bonus!
Also on my cutting table is By Hand London Anna dress, more about that soon.
Musings of a Craft Enthusiast 